Weak batteries may disrupt normal
operation of the remote
We recommend that you use only AA alkaline batteries.
Remotes without the Memory Lock™ feature may need to be reprogrammed when the batteries are removed.
See the troubleshooting section for more info.
© 1997 US Electronics Components Corp.
All rights reserved
Part Number USE17095, RC9600/9640
rev 1.1 9701
before you begin
setting up your remote control
PATENT PENDING
FWD
VOL
▲
TM
User’s Guide
for the
UTV86X-E
featuring Memory Lock™
2-in-1 Cable TV
Remote Control
If you have a TV with a remote
control, we recommend that you
plug its power cord directly into
a wall outlet if available (your
cable installer may select an
alternate setup).
Make sure to set your TV to
channel 2, 3, or 4 as directed by
your cable company.
for your remote-controlled television
TM
Make sure your TV is on. Press the
[MENU]
button, then
the
[TV POWER]
button.
Enter the three-digit code for your television from the
“television codes” chart on the back of this sheet.
At this point you have two options depending on whether
you want volume to be controlled through your cable box
or through your TV:
option 1:
If you want volume to be controlled through
your cable box, press
[POWER]
.
option 2:
If you want volume to be controlled through
your TV, press
[TV POWER]
.
Press the
[TV POWER]
button. If your TV turns on and
off, you’re all done. If your TV
doesn’t
turn on and off,
perform steps 1 through 3 again with the next available
code for your TV brand. If none of the codes listed for
your TV work, try the “check all codes” method below.
step 1
step 2
step 3
test
your
setup
Take note of the buttons that you’ll
use to setup your remote control
important note
OPEN
install batteries
the “check all codes” method
Follow the steps outlined in this section if you’ve been unable to determine the
correct code for your TV. This method “hunts” through all possible codes in the
remote until it finds the code for your remote-controlled TV.
1.
Manually turn ON your TV set.
2.
Point the remote control at the TV and press the following sequence of
keys:
[MENU]
,
[TV POWER]
,
[0]
,
[0]
,
[0]
, and
[TV POWER]
. If the TV turns
OFF, congratulations – you’re all done.
If the TV is still ON, continue at
step 3 below
.
3.
Press
[MENU]
,
[TV POWER]
,
[FAV]
, and
[TV POWER]
to check the
next
code. If the TV turns OFF, press
[SELECT]
to exit this procedure.
If the TV is
still ON, continue at step 4 below
.
4.
Repeat pressing
[FAV]
, followed by
[TV POWER]
, until the TV turns OFF.
When the TV turns OFF, press
[SELECT]
to save the code.
Please be patient: there are about 90 possible codes.
