US drives PHOENIX EX, Инструкция по эксплуатации

Страница: 7 / 172

INTRODUCTION 1-3

Critical speed rejection with programmable 3 points with bandwidth to avoid mechanical resonance.

Flycatcher “catch a spinning motor”.

Password protection to prevent parameter changes by unauthorized personnel.

4 to 20ma reference loss detection.

Programmable thresholds and more.
Control I/O:

8 Digital Inputs: 7 user programmable inputs and 1 dedicated input for “Stop”, rated for 24Vdc logic control.
 2 Digital Outputs: 2 programmable dry contacts rated 115Vac @ 5A; 30Vdc @ 3.5A.

2 analog inputs: -10 to +10V (10 bits) with input impedance: 75K

, or 4-20 mA @ 500

- Programmable.

2 analog outputs: -10 to +10V (10 bits) @ 2 mA max; output impedance = 100

. - Programmable.

1 voltage reference: +15Vdc reference @ 10 mA max.

24Vdc source: Use to power operator pushbuttons and US Drives option boards: 24Vdc @ 80 mA max.
Standard Drives Features:

New generation IGBT.

Nema type 1 (IP20) as standard for all models.

50

C ambient with standard Nema type 1 (IP20) enclosure.

High voltage ratings: 10% , 10% models, and 10% models

Modbus RTU & Metasys N2 serial communications ready.

Input line suppression: Metal oxide varistors for line-to-line and line-to-ground voltage surge protection.

Built-in radio frequency filter.

Nonvolatile parameter storage.

All parameters are saved in EEPROM (nonvolatile).

Autologging fault history: ten last faults recorded in order of occurrence.

Internal control diagnostics.

Simple programming through the Real-time Operator module (R.O.M.) with all data entries and monitoring in
engineering units with English descriptions.

Setpoint Control P.I.D.

Injection DC Braking with braking time calculated automatically by the drive.

Critical speed rejection.

Programmable autorestart.

Fixed or variable carrier ( programmable).

Programmable “Total Drive Run Time” accumulator.

Parameter security code.

User definable displays with programmable format and parameter scaling.

7 programmable digital inputs for custom setups.
 Metering: AC line voltage, motor current, motor voltage, DC Bus voltage, Kw, Kwh, running Kwh cost, and more…

8 programmable digital preset speeds with user selectable acceleration and deceleration rates.

M.O.P. function.

Programmable PWM carrier frequency, fixed or variable.

Programmable thresholds.

Programmable maintenance timers.

Bi-directional auto-speed search (flycatcher) for starting into rotating loads.

S-curve accel/decel control.

Programmable time delay and logic functions (AND, OR, NOR) of bit parameters, digital inputs and outputs.

Adding, subtracting, multiplying, dividing, ramping, limiting, and/or filtering functions of parameters and analog
inputs and outputs.

Parameters can be displayed, routed to an analog/digital output, or re-routed and used as an input parameter to
control another function within the drive.

User programmable functions and modes.

Open Loop or closed-loop control operation easy setup.

Precise control of motor speed and torque.

Rigid and non-rigid position control including orientation.