11
E N G L I S H •
User’s manual
the tool to be operated by children, individuals
unfamiliar with its operation or unauthorized
personnel.
• Keep all screws, bolts and covers tightly in
place. Keep all screws, bolts, and plates tightly
mounted. Check their condition periodically.
• Do not use power tools if the plastic housing
or handle is cracked. Cracks in the tool’s hous-
ing or handle can lead to electric shock. Such
tools should not be used until repaired.
• Blades and accessories must be securely
mounted to the tool. Prevent potential injuries
to yourself or others. Blades, cutting imple-
ments and accessories which have been mount-
ed to the tool should be secure and tight.
• Keep motor air vent clean. The tool’s mo-
tor air vent must be kept clean so that air can
freely flow at all times. Check for dust build-up
frequently.
• Operate power tools at the rated voltage.
Operate the power tool at voltages specified
on its nameplate. If using the power tool at a
higher voltage than the rated voltage, it will
result in abnormally fast motor revolution and
may damage the unit and the motor may burn
out.
• NEVER use a tool which is defective or op-
erating abnormally. If the tool appears to be
operating unusually, making strange noises, or
otherwise appears defective, stop using it im-
mediately and arrange for repairs by a URREA
authorized service center.
• NEVER leave tool running unattended. Turn
power off. Don’t leave tool until it comes to a
complete stop.
• Carefully handle power tools. Should a
power tool be dropped or struck against hard
materials inadvertently, it may be deformed,
cracked, or damaged.
• Do not wipe plastic parts with solvent. Sol-
vents such as gasoline, thinner benzine, carbon
tetrachloride, and alcohol may damage and
crack plastic parts. Do not wipe them with such
solvents. Wipe plastic parts with a soft cloth
lightly dampened with soapy water and dry
thoroughly.
• ALWAYS wear eye protection that meets the
requirement of the latest revision of ANSI Stan-
dard Z87.1.
• ALWAYS be careful with buried object such
as an underground wiring. Touching live wir-
ing or electric cable with this tool may result
in electric shock. Confirm before use whether
hidden objects are present, such as electric ca-
bles within the wall, floor or ceiling.
Although this system has no external ground-
ing, you must still follow the normal electri-
cal safety precautions given in this Instruction
Manual, including not using the power tool in
wet environments. To keep the double insula-
tion system effective, follow these precautions:
• Only URREA AUTHORIZED SERVICE CENTER
should disassemble or assemble this power
tool, and only genuine URREA replacement
parts should be installed.
• Clean the exterior of the power tool only
with a soft cloth moistened with soapy water,
and dry thoroughly.
• Never use solvents, gasoline or thinners on
plastic components; otherwise the plastic may
dissolve.
FEATURES
KNOW YOUR TOOL
Before attempting to use this product, become
familiar with all of its operating features and
safety requirements.
1. COLLET CHUCK
2. NOZZLE NUT
3. SHAFT COVER
4. VENTILATION SLOTS
5. SWITCH
6. CABLE
7. MOUNTED POINT
8. AXIS
9. KEY
Primary handle.
Secondary handle.
REC1014 manual.indd 11
18/01/16 2:25 p.m.
