22
DS1761-026
1.2.4.2 Video Door Phone Video Voicemail
Follow the procedure below to activate or change the video door phone message service settings:
•
Press the
Device Mode Settings
parameter and then select
Video Voicemail
.
•
The screen with the various message service settings is displayed (the current value is shown to the
right of each setting; in case of Audio Message, the date and time of its recording):
–
Recording Time
, i.e. the max duration of the audio/video message (between 10 and 20 seconds).
–
Audio Message
, i.e. the personalised audio message that is played at the outdoor calling station
when video door phone voicemail is activated.
–
Play Audio Message
allows the audio message to be enabled or disabled when the video door
phone voicemail is active. If it is disabled no message will be played at the outdoor calling station.
–
Play Beep
, to enable or disable the beep sound at the end of the audio message (if you disable the
audio message the beep will also be automatically disabled).
Tap the setting that you wish to change. According to the chosen setting, a pop-up window will open
where you can:
– Edit the recording time of the audio message.
– Record and replay the existing audio message. A new message will overwrite the existing one. The
icon
can be used to delete the existing message.
– Enable or disable playing of the audio message (disabling does not delete the existing message,
which can be re-enabled later on).
– Enable or disable the end beep.
