background image

8

DS1060-119A

3  CONNECTION INSTRUCTIONS

Refer to the instructions contained in the system manual for wiring, maximum distances and con

fi

 guration 

operations.

3.1  CONNECTOR AND WIRING WITH CAT5 WIRE

Use Urmet RJ45 connector kit for connections (product on sale until stocks last).

Connect the CAT5 wire to one of the RJ45 connectors with Urmet logo:

Insert the wire in the guide respecting the colour coding shown (Standard T568B).

8

1

Wire

No.

Wire colour

1

White-Orange

2

Orange

3

White-Green

4

Blue

Wire

No.

Wire colour

5

White-Blue

6

Green

7

White-Brown

8

Brown

Cut the wires which protrude from the guide by approximately 5mm, insert the guide in the plug and 

crimp the plug with a speci

fi

 c tool.

Plug

8

1

~ 5 mm

8

1

  Make sure that the grey sheath remains inside the plug.

  This type of connection DOES NOT ensure double insulation..

4  TECHNICAL SPECIFICATIONS 

Power voltage and consumption on terminals V+ e V-

Power voltage: ...............................................................................................................................

44 – 57 Vdc

Max. consumption (video call) @48 V: .................................................................................................

200 mA

Max. consumption (stand-by) @48 V: ....................................................................................................

80 mA

Working temperature range: ..................................................................................................

-10 °C ÷ +50 °C

Relay contact range C, NC, NO:

Maximum switching voltage:  ....................................................................................................................

30 V

Maximum switching current:  ...................................................................................................................

3,5 A

Maximum switching load: .............................................................................................................

40 VA 25 W

Garage gate relay contact range (SE2):

Maximum switching voltage:  ....................................................................................................................

30 V

Maximum switching current:  ...............................................................................................................

200 mA

Max. distance from hall button:  .............................................

25 m with cable cross-section area 0.5 mm

2

Max. distance from open door sensor:  .................................

50 m with cable cross-section area 1.5 mm

2

Max. distance from supplementary power supply:  .............

100 m with cable cross-section area 1.5 mm

2

Max. distance from capacitance lock:  ................................

100 m with cable cross-section area 1.5 mm

2

  Clean regularly with products suitable for metallic surfaces to keep the push-button panel looking 

good in time. Do not use aggressive chemical products (e.g. solvents, ammonia, soda, etc.).

Содержание IPercom elekta steel 1060/18







Отзывы: