6
DS1060-119A
ENGLISH
1 DESCRIPTION
The device Ref. 1060/18 is an Elekta Steel vandal-proof call module for Ipercom serverless system.
The main features are:
Signal management using 3.5” graphic colour display and evolved graphic user interface (GUI).
Simultaneous lock with pulse capacitance discharge (SE+; SE-) and no-voltage contact relay (C-NC-
NO) operation.
Garage gate lock low current operation (SE2).
Hall button input.
Door sensor input.
Audio repeat device control for use with hearing aid.
LAN connection with RJ45 connector and Power Over Ethernet (POE).
Set-up by means of 2 terminals for local power supply.
125 kHz integrated transponder key reader (Ref. 1125/50).
Infrared proximity sensor for user detection.
CCD colour camera with wide-angle lens.
Alphanumeric keypad with 18 buttons, three of which multifunctional.
2 INSTALLATION
Arrange the duct so that it ends in correspondence with the lower hole of the
fl
ush-mounting box.
Remove the lower cap from the wire hole (1).
Apply adhesive labels on the holes for the screws of the frame (2).
Install
fl
ush-mounting box at indicated height (3).
Fix the magnet (tamper) at the indicated height with the two-sided adhesive tape included (4).
Fix the frame to the
fl
ush-mounting body (5).
Make the electric connections.
Fix the calling module to the frame (5).
ALTO
TOP
HAUT
A
ALTO
TOP
HAUT
B
ALTO
TOP
HAUT
118 mm
1,55 ÷ 1,60 m
298 mm
1
2
3
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
