15
DS4119-00
3. TROUBLEShOOTINg
Problems
Solutions
There is a lot of static when calls handover to the
repeater.
and/or
The LED on the repeater won’t stop flashing.
Moving the repeater closer to the base.
Checking for interference from electronic
devices.
Making sure the repeater is not too close to
metal objects or thick walls.
De-registering the repeater and registering it
to the base again.
•
•
•
•
Calls will not handover to the repeater.
Making sure the repeater is within the base’s
good signal range.
Making sure there is at least 10 meters
between repeaters.
De-registering the repeater and registering it
to the base again.
•
•
•
I used to be able to connect to the base, but now
I cannot.
Making sure the repeater is powered on.
De-registering the repeater and registering it
to the base again.
•
•
The repeater continues to flash on and off after
registration process had been completed.
De-registering the repeater and registering it to
the base again.
The audio quality is very poor or noisy when
receiving a call.
The signal connection is very poor. Trying to find
another location where the signal to the base is
better
Calls lost or audio becomes poor when moving
from the base reception range the repeater
reception reception range.
You may be moving out of the base or repeater
reception range, or are in a blind spot. Moving
towards the base or repeater.
4. TEChNICAL DETAILS
Standard: ................................................................ Digital Enhanced Cordless Telecommunications (DECT)
Frequency range:
................................................................................................................... 1,88 to 1,9 GHz
Operating range: .......................................................................... up to 300 m outdoors, up to 50 m indoors
Temperature range: ..................................................................................................... Operating 0°C to 40°C
Storage -0°C to 60°C
Electrical power: .......................................AC power adapter Ten Pao - S004LB0600030 / S004LV0600030
Input 100-40 Vac 50/60 Hz 150 mA, output 6 Vdc
300 mA