1
DS4119-00
2.2 hOW IT WORKS ?
The DECT repeater lets you extend the coverage area of your telephone system cod. 4119/1 in all directions,
including up and down. When registered to the base, the repeater’s coverage area overlaps the coverage
area of the base, the base can hand-off calls to the repeater as the user moves from one coverage area to
another. When connected to the repeater, the mobile handset operates in the exactly same way as it does
when connected to the base, and the hand-off from the base to the repeater can be completely invisible to
the end user, even during an active call. Each base supports up to six repeaters, so you can extend the base
coverage in all directions, including through floors and ceilings.
In addition, the DECT Repeater supports a sequential or “daisy chain” layout to extend coverage in a single
direction. Up to two repeaters can be installed in sequence.
A
B
IMPORTANT: It is possible to roam between the Repeater and the base, however, call handover
during conversation is not always guaranteed.
2.3 SETTINg UP yOUR REPEATER
Before installing the repeater, you need to activate the repeater mode on your telephone system and then
register the repeater to the base.
2.3.1 AUTOMATIC REgISTRATION
The repeater seeks out the base and automatically registers to that base.
Make sure the repeater is powered off (i.e. , the AC power adapter is not connected).
Turn on the Repeater mode on the base and then set the base into registration mode. (Consult the User
Manual that comes with your base station for more information).
1.
.
