34
x Errors – Causes – Help
1. The LED of the wireless doorbell button flashes after pressing, but the
wireless doorbell does not respond.
1.1 The wireless doorbell does not have adequate power supply
. Check if
the socket works by using another device.
2. You hear four beeps after the melody
2.1. The batteries in the wireless doorbell button do not have the required
power.
Insert two 1.5 V batteries (type AAA).
3. The LED of the wireless doorbell button does not flash after pressing.
3.1. The batteries in the wireless doorbell button do not have the required
voltage.
Insert two 1.5 V batteries (type AAA).
3.2. The batteries are inserted incorrectly (wrong polarity).
Insert the batteries with the plus symbol in the direction of the engraved "+".
4. The wireless doorbell button cannot be paired with the wireless
doorbell.
4.1. The batteries in the wireless doorbell button do not have the required
voltage.
Important: The LED of the wireless doorbell button must flash 6-7 times
(7 is the maximum). If the LED flashes only 5 times or fewer, for example, the
batteries are running low and must be replaced.
4.2. You waited too long after pressing the menu button before pressing the
select button.
Press the select button within 7 seconds after pressing the
menu button.
