urmet domus ELEKTA STEEL 1375, Инструкция по эксплуатации

Страница: 8 / 12

8
DS1375-024A
3 CONNECTION INSTRUCTIONS
• Connect the CAT5 wire to one of the RJ45 connectors with Urmet logo:
• Insert the wire in the guide respecting the colour coding shown (Standard T568B).
8
1
Wire
No.
Wire colour
1 White-Orange
2 Orange
3 White-Green
4 Blue
Wire
No.
Wire colour
5 White-Blue
6 Green
7 White-Brown
8 Brown
• Cut the wires which protrude from the guide by approximately 5mm, insert the guide in the plug and
crimp the plug with a tool.
Plug
8
1
~ 5 mm
8
1
• Make sure that the grey sheath remains inside the plug.
This type of connection DOES NOT ensure double insulation.
Wires with cross-section area of 0.5 mm
2
or larger must comply with IEC 60332-1-2; wires with
cross section area smaller than 0.5 mm
2
must comply with IEC 60332-2-2.
4 TECHNICAL SPECIFICATIONS
Power voltage and consumption on terminals V+ e V-
Power voltage:............................................................................................................................... 44 – 57 Vdc
Max. consumption (video call) @48 V: ................................................................................................. 200 mA
Max. consumption (stand-by) @48 V: .................................................................................................... 80 mA
Working temperature range: .................................................................................................. -10 °C ÷ +50 °C
Relay contact range C, NC, NO:
Maximum switching voltage: .................................................................................................................... 30 V
Maximum switching current: ................................................................................................................... 3,5 A
Maximum switching load: ............................................................................................................. 40 VA 25 W
Garage gate relay contact range (SE2):
Maximum switching voltage: .................................................................................................................... 30 V
Maximum switching current: ............................................................................................................... 200 mA
Max. distance from hall button: ............................................. 25 m with cable cross-section area 0.5 mm
2
Max. distance from supplementary power supply: ............. 100 m with cable cross-section area 1.5 mm
2
Max. distance from capacitance lock: ................................ 100 m with cable cross-section area 1.5 mm
2