42
DS4091-002
43
DS4091-002
8.4 EXTERNAL AMPLIFIER ACCESS
To access an amplifi er system:
•
Press the
button and pick up the handset.
•
Wait for the confi rmation followed by a triple tone and speak.
The sound signal from your telephone will be made available to terminals COM and AMR.
•
Hang up to end the operation.
Access to the amplifi ed is not possible when the door phone conversation is in progress.
8.5 ALARM
The function is used to set the alarm.
To switch the alarm on:
•
Press 2F followed by F15.
•
Dial HH MM and wait for the confi rmation message, where:
HH= hour
(00 ÷ 23)
MM= minutes
(00 ÷ 59)
•
Press the
button to end after you hear the “alarm time …” message confi rming that the service is
active.
To query the alarm:
•
Press 3F followed by F15.
•
Wait for the confi rmation message.
•
Press the
button to end the operation.
The
icon will light up on the display to indicate that the alarm function is on if the telephone is connected
to a Agorà 6 or Agorà 2 switchboard.
8.6 PABX CALL ON-HOLD
This service allows to put an external call on-hold (fl ash on dial line) if the Agorà 6 switchboard is in turn
connected as extension to another switchboard (PABX).
To send a fl ash on a dial line during a call:
•
Press 2F followed by F7.
8.7 SUPPLEMENTARY TELEPHONE FUNCTIONS (STS) OFFERED BY TELECOM ITALIA
This function is used to access the supplementary functions offered by TELECOM ITALIA, such as call
notifi cation, conference call, etc.
If you need to generate a fl ash pulse on the dial line:
•
Press 2F followed by F7.
•
Dial the required TELECOM ITALIA function number.
9. DOOR PHONE FUNCTIONS
The available door phone functions are described in this chapter.
9.1 CONNECTION TO THE DOOR PANEL
To connect to the door panel:
•
Press the
button and pick up the handset.
9.2 ANSWERING A DOOR PHONE CALL
A specifi c ringer is used for door phone calls on enabled telephones. The fi rst user who replies will be put
into communication with the door panel. All other extensions will stop ringing.
To answer a door phone call using an enabled telephone:
•
Pick up the handset.
To answer a door phone call using a non-enabled telephone:
•
Press the
button and pick up the handset.
9.3 ANSWERING THE DOOR PHONE DURING A CALL
The fi rst call can be put on-hold and the second call answered if a door phone call is received when a
conversation is in progress (indicated by a warning tone). You can also switch between conversations, i.e.
speak with one caller and kept the other caller on-hold.
To put an internal call on-hold and answer an incoming door phone call:
•
Press the
button: the user on-hold will hear the on-hold tone.
To disconnect from the door unit and pick up the call on-hold:
•
Press R twice.
Hang up the handset during the door phone communication to go back to the call on-hold.
9.4 DOOR PHONE FOLLOW-ME
This function is used to receive door phone calls on a previous programmed telephone number.
To switch the function on:
•
Press 2F followed by
.
•
Dial T and wait for the confi rmation message, where:
T
= 81 ÷ 86 for line 1 ÷ 6
T
= 87 ÷ 89 for basic interface 1 ÷ 3
T
= 74
for basic interface 4
•
Hang up.
To switch the function off:
•
Press 3F followed by
.
•
Wait for the confi rmation message.
•
Hang up.
To check the function:
•
Pick up the handset and wait for the divert tone indicating that the service is on.
•
Dial #632 and wait for the confi rmation message.
•
Hang up.
