urmet domus 1145/1, Руководство пользователя

Страница: 13 / 24

DS1145-019A 13
Parameter Value Meaning Basic Ex.1 Ex.2
52 d call maximum duration 1 2 1
d
max. time, after which the device hangs up. This value can be increased
during the call with the phone (* or #). Time configuration is shown in
the table.
List of related parameters: 42 8# 85
Parameter Value Meaning Basic Ex.1 Ex. 2
53 w button pressing time 2 2 2
w max. time [sec] between button pressing [range 1-9]
Note: if the time between two button pressing is higher than time w, the code results incorrect.
List of related parameters: 1 2 32 33 34 47 48 49 8# 85
Parameter Value Meaning Basic Ex. 1 Ex. 2
54 z
time to hang up when the
number is redialled
2 2 2
z time [sec] after which the device will hang up, before the number is redialled (by pressing the
button during the call or dialling, will be heard the busy tone) [from 1 to 5].
List of related parameters: 8# 85
Parameter Value Meaning Basic Ex. 1 Ex. 2
55 z time before dialling 1 1 1
z time [sec] after which the device seizes the line, before the number is dialled [from 1 to 5]. This
time is different for each PABX, but most of PABX can usually manage the number up to 2
seconds after seizing the line.
List of related parameters: 8# 85
Parameter Value Meaning Basic Ex. 1 Ex. 2
56 h
number of rings before
hanging up
12 12 12
h after dialling the desired number, the device calculates the KVT number (rings tones). If the value
is higher than h value, it will hang up [from 04 to 99]. The number dialling is repeated when 2
groups mode is configured.
List of related parameters: 47 8# 85
Parameter Value Meaning Basic Ex.1 Ex.2
57 t DTMF tone duration selection 5 (100ms) 5 (100ms) 5 (100ms)
58 m
Duration difference between
DTMF tones
5 (100ms) 5 (100ms) 5 (100ms)
59 f Flash duration 1 (100ms) 1 (100ms) 1 (100ms)
50 p
Pause duration / time
between button pressing
8 (800ms) 8 (800ms) 8 (800ms)
time [min] value
0,5 0
1 - 9 1 - 9
15 *
30 #