urmet domus 1092/601 THERA 4 MINIDOME P/T/Z, Инструкция по эксплуатации, Страница: 51 / 136

DS1092-041C
51
Proceed by storing preset positions to be included in the tour, up to 16, following the previously described
steps.
After entering all the required presettings and parameters, press “
ON ” to end the operation.
In brief:
1. Tour n. (from 1 to 6 ) + “ TOUR ” + “ ON ”
2. DOWN
3. Preset n. (previously stored from 1 to 32 )
4. DOWN
5. Panning speed (from 0 to 9 )
6. DOWN
7. Pause time on each presetting (from 0 to 9 )
8. DOWN
Repeat from step 3 to step 8 to enter the other presettings (maximum 16).
End the setting as follows:
9. ON
Recalling a stored track tour
In standby mode, press “ TOUR ”. Then use the number buttons to indicate the tour to be displayed (from 1
to 6). Then press “ ON ” to start the tour or press “CLEAR” to go back directly to standby mode. Press any
button “ UP ”, “ DOWN ”, “ LEFT ” or “ RIGHT ” to stop the track tour in progress.

Important note: The track tour in progress is interrupted when new commands are imparted using the
control panel (e.g. by pressing “UP”, “DOWN”, ”LEFT” or “RIGHT”).
Deleting a stored track tour
In standby mode, select the tour to be deleted using the number keys (from 1 to 6). Press “ TOUR ” and then
“ OFF ” to enter tour deletion mode. Enter the number of the tour to be deleted using the number keys. Then
press “ OFF ” to delete the tour or “ CLEAR ” to cancel the operation and go back to standby mode.
Activating the default tour
In standby mode, press “ PRESET + 51 + ON ”. Press any button “ UP ”, “ DOWN ”, “ LEFT ” or “ RIGHT ” to stop
the function in progress.
Setting home position
This function consists is returning the dome automatically to preset position 1 in the previously set time
without imparting any control.
The waiting time before returning to preset position 1 may be chosen between 1 minute, 2 minutes, 4
minutes, 8 minutes and 10 minutes.
Press “
CAL+100+ON ” to activate the function from the panel.
To set 1 minute, press “
CALL+95+ON ”.
To set 2 minute, press “ CALL+96+ON ”.
To set 4 minute, press “ CALL+97+ON ”.
To set 8 minute, press “ CALL+98+ON ”.
To set 10 minute, press “ CALL+99+ON ”.
Press “
100+ON ” to deactivate the function.