urmet domus 1072/59 Скачать руководство пользователя страница 10

ACCESSORIES

10 

−−−−

 

sec.4c

2GO! - Technical manual 

5.   Activation.

 After installing and testing the rest of the system, 

connect and power up the SVC following the normal installation 

rules shown in the manual. In particular, if a Ref. 1082/20 power 

unit free line is connected to, remember to turn the dip switch on 

the line used to the off position on the power unit. Check that the 

system is still working normally and that the LED on the SVC is 

off.

DESCRIPTION OF TERMINALS

0~ 

Power

12~

LINE   2GO! system connection

MMS   MMS messaging activation terminals

If an optional modem is not installed, connect a bridge between 

terminals MMS.

OPERATION

RECORDING FILMS

The SVC will start recording a 7 second 

fi

 lm a few seconds after a call 

from a video door phone calling station is received. The 

fi

 lm will be 

deleted if the user answers or opens the door. If the user either does 

not answer or a call is made to another user, the 

fi

 lm will be stored in 

the permanent SVC memory. The date and time of the call will also be 

stored with the 

fi

 lm.

The permanent memory is dimensioned to contain 8 

fi

 lms for each 

user in the system. The 

fi

 lms started from the 

fi

 rst will be deleted 

when a new call is received by a user who already has eight previously 

stored 

fi

 lms.

FILM PLAYBACK

Press the button 

/

/

 

on the video door phone without picking 

up the handset to check if 

fi

 lms are stored. Three cases can occur:

Case A:

 The busy tone (series of beeps) will be heard and the video 

door phone will not light up. This means that the line is busy because 

another conversation is in progress. Try again later.

Case B:

 The video door phone lights up and the following image 

appears:

This means that there are no stored 

fi

 lms. The video door phone will 

go out after a few seconds.

Case C:

 If the line is not busy and there are stored 

fi

 lms, the video 

door phone will light up and the number of stored 

fi

 lms will appear:

3

§

The number of 

fi

 lms will appear for two seconds and then the 

fi

 rst 

stored 

fi

 lm will be played:

15/05/04

10:27

1/3

7

Recording

date and time

Film number/total number

of stored films

Seconds to the end

of the film

Video n°1

The deletion symbol will appear on a row on the top:

15/05/04

10:27

1/3

5

Instructions

for deleting

the film (blinking)

= X

Video n°1

To delete the 

fi

 lm, press the button 

/

 to go directly to the next 

fi

 lm. If you do not want to delete the 

fi

 lm, wait for it to end. The next 

will be played:

15/05/04

11:35

2/3

7

= X

Video n°2

The Urmet Domus logo will appear when all the 

fi

 lms have been 

deleted and the video door phone will go out after a few seconds.

All playing and deletion functions will be available for 60 seconds after 

the button 

/

/

 is pressed for the 

fi

 rst time. After 60 seconds, 

the monitor will go out and the line will be freed. Alternatively, the 

monitors can be switched off before the timeout by picking up and 

hanging up the handset: this will free the line.

The playing cycle will start again from the beginning if all 

fi

 lms are 

played before the 60 second timeout (less than 8 stored 

fi

 lms). 

The deletion symbol (

 = X) will appear immediately allowing 

the immediate deletion of the 

fi

 lm.

SV124-0423A

2

3

1

8

5

LINE

MMS

~0

~12

ACTIVATE MMS
TRANSMISSION

2Go! system
Bus line

Ref.1082/88

2GO! VIDEO

MEMORY MODULE

POWER SUPPLY
230Vac/12VCC

OPTIONAL

FOR ONE FAMILY

SYSTEMS

TRANSFORMER

MODEM GPRS

Ref.1082/52

LINE~

§

VIDEO MEMORY MODULE

Ref. 1082/88

VIDEO MEMORY MODULE Ref. 1082/88

OPERATION

Содержание 1072/59















Отзывы: