urmet domus 1067/024, Руководство по установке

Страница: 66 / 120

DS1067-063D
66
LBT20064
5.5.4 Montaggio Assembly of the 1067/012A - 1067/012B Vocal synthesis board
Figure 36 - Vocal synthesis board 1067/012A
– 1067/012B
A Jack for earphone (included)
B Terminal board for audio bus
C Jumper to select recording input
– must remain on B position
D
Holes for support spacer
E
Jumper for preferred language selection
To assemble the vocal synthesis board, follow the instructions below:

Insert the two support spacers included in the two holes D of the board.

Insert the header connector in the special connector N of the mother board.
Figure 37
– Assembling the vocal synthesis board
RECORDING AND LISTENING TO MESSAGES: For information on procedures for recording and listening to message,
see the control panel Programming Manual.
SELECTING LANGUAGES: Use the JP4 and JP5 Jumpers to select the desired language ( Figure 36
–
E).
IMPORTANT! The connection and disconnection of the optionals and accessories must always be done while the
control panel is disconnected from all power supplies (both mains and battery).
1067/012A 1067/012B
JP5 CLOSED :
English German
1067/012A unusable
JP4 CLOSED :
French Slovenian
1067/012A unusable
JP4-JP5 CLOSED :
Italian Spanish