URIT Medical Electronic UC-32A, Руководство по эксплуатации

Страница: 50 / 70

45
4) Remove the reagent strip from the sample,
gently touch the edge of the reagent strip and
suck out the excess urine.
5) Place the reagent strip on the strip tray.
When placing, it is important to ensure that the
reagent strip is fully placed in tray groove, and that
the reagent strip has one side of the reagent block
facing up.
6) Insert the strip tray into the tray conveyor of
the instrument, and the instrument will test
automatically.
Note that the handle end of the reagent strip should
be on the outside of the instrument, and make sure
that the end of the strip tray touches the deepest
slot of the tray conveyor.
Caution
1. The handle end of the reagent strip should be
guaranteed to be on the outside of the
instrument. If the reagent strip is in the wrong
direction, the instrument will prompt for error.