18
6.3.3 Copy and Setting
Copies HPA setting and data from source device to target.
Scroll to select "6.3 HPA Copy Modes >> Copy All HPA”, then press "OK" to save this setting.
6.4
Skip Bad Sectors
Scroll to select "6.4 Skip Bad Sectors”, then press "OK" to scroll through the available values
for skipping bad sectors. If the device data is critical and needs to be a full clone, it is
recommended to set “Skip Bad Sectors” at "0.” Bad sectors can be set as unlimited or at a
value from 0 to 65,535.
6.5 Erase Source Port
This function allows user to enable or disable the source port for sanitization.
Scroll to select "6.5 Erase Source Port”, then press "OK.” Then scroll through to select one of
two settings.
❶ Disabled
Source port will be unable to erase.
Scroll to select "6.5 Erase Source Port >> Disabled”, then press "OK" to save this setting.
❷ Enabled
Source port will be able to erase.
Scroll to select "6.5 Erase Source Port >> Enabled”, then press "OK" to save this setting.
6.6 Unknown Format
This function only works with “6.1 Copy Mode >> System and Files.”
Scroll to select "6.6 Unknown”, then press "OK”. Then scroll through to select one of two
settings.
Unknown format includes all forms of modified and proprietary data and partitions.
❶ Copy Unknown
Caution
HPA function “Copy and Setting” may change the original parameter of target
devices. To reset it, user must set “6.8 Clear HPA at Erase >> Clear HPA Setting”
and then execute “4. Erase.”
Caution
The “Copy+Compare” function is advised for enhanced copy accuracy.