8
5. Signal Detection
5.1. USB2 and USB3
Detects both USB2.0 and USB3.0 signals of the device.
5.2. Only USB3
Detects USB3.0 signal of the device.
5.3. Only USB2
Detects USB2.0 signal of the device.
6. Utilities
6.1 Information
6.1.1 USB Info.
This feature will show flash’s data
information, file format, content size, and
capacity.
6.1.2 System Info.
This feature will show system information,
such as, model number and software version.
6.2 Erase
6.2.1 Quick Erase
Erases device(s)’ index table.
6.2.2 Full Erase
Fully erases, bit for bit, data on flash,
including format and content.
6.2.3 DoD Erase
Erases flash three times complying with USA
Department of Defense (DoD) standards.
6.3 Do Format
6.3.1 Auto Format
Auto formats media to FAT16 or 32.
6.3.2 FAT16 Format
Formats media to FAT16.
6.3.4 FAT32 Format
Formats media to FAT32.
6.4 System Update
System firmware update via the flash media
.
7. Setup
7.1 Copy Area
7.1.1 System and Files
The system automatically analyzes the source
data’s format and copies only the data area.
(Available for FAT16/32, NTFS, Linux -
ext2/ext3/ext4/LVM)
7.1.2 Whole Media
Copies the flash’s entire content,
including
the empty space.
