4
Before You Start
Important Notice
l
Carefully read the entire manual before operating.
l
Never turn off the power while the firmware is updating.
l
Devices will operate at high temperature during high-speed tasks. Please wear
protective gloves to prevent burns when handling devices.
l
Devices working in high temperature may cause it to slow down or even shut down.
Please make sure the devices are not overheated.
l
Ensure machine and operator are properly grounded to prevent ESD.
l
Make sure the source device is correct and functioning.
l
Equal capacity of source and target is recommended for guaranteed data consistency.
l
Using the Copy+Compare function provides the most flawless duplication.
l
Damage incurred due to noncompliance with U-Reach operating instructions will void
the warranty.
l
Store the equipment safely when not in use and keep out of the reach of children.
l
Use only approved, stable power sources.
l
Use product only in a clean, dry, dust free, and ventilated area. Liquids or foreign debris
can severely damage your duplicator.
l
It is typical for the machine to heat up during operation.
l
While in use, do not move the duplicator or remove devices.
l
Static electricity may cause duplication error. Please pay attention to the duplicator’s
environment and operator’s equipment. Purchasing static electricity elimination
equipment to avoid static electricity shock while in high static electricity areas.
l
If you want to change your Log password, please keep your password in a safe place in
case you lose it. Please understand that the manufacturer does not provide password
reset service due to the consideration of personal privacy.