confirm the setting.
4. SETTING THE OPERATION MODE
The detector comes with three operating modes of ALL METAL, DISC,
PINPOINT.
a.ALL METAL
—Used for detecting all types of metal.
Press SET twice, then ENTER to get ALL METAL. In this mode, the unit
can detect all kinds of metal.
b.DISC
—Used for target discrimination. You can set the target range or
eliminate the target you don
’t want by pressing SET and MODE buttons.
Press SET twice, the blank frame flashes, press UP or DOWN to choose
the target you don
’t want. Then press MODE. You can choose several
targets to be eliminated. After that press ENTER to confirm the selected
target to be eliminated. To pick up the eliminated items, simply press
MODE before pressing ENTER. Or repress SET twice and UP or DOWN
to move the flashing frame to the target you want to pick. Then press
MODE and ENTER.
Note:
A crossed frame is for item eliminated.
5. PINPOINT
After you find a metal object, you can use P/P to pinpoint the target. Hold
down P/P button. LCD will display P/P and an icon of eye. Slowly move the
search coil above the sound area. The detector sounds and the depth
indicator on the LCD displays the probable depth of the target. Then release
the button. Sweep the search coil again, keeping the same distance of search
coil, sound disappears. Hold down P/P again, closer the search coil to the
sound area, the detector sounds again. Repeat the above steps until the
detector displays the stronger signal where the location of the target is.
TESTING AND USING THE DETECTOR
To learn how the detector reacts to different metals, you should test it before
you use it the first time. You can test the detector indoors and outdoors.
Indoor Testing and Use
7
