URC Total Control TRF-ZW10 Скачать руководство пользователя

Страница: 10 / 44

Total Control

TRF-ZW10

Owner’s Manual

Devices

This section is used to include/exclude Z-Wave devices, configure device settings,
test functionality/feedback, and more.

The

Devices

tab is the default landing location when the

TRF-ZW10

sub-step has

been selected.

Below are descriptions of each available button:

1. TRF-ZW10 Devices:

This list contains all of the Z-Wave devices that have

been included with the TRF-ZW10 gateway.

Devices can display here in three (3) different colors, each color indicating a
specific status condition:

•

Black:

Connection status is

normal

•

Red:

Z-Wave device is

offline

•

Gray:

The Z-Wave device exists on the list but does not exist

within the TRF-ZW10 gateway.

Z-Wave devices are displayed on this list with a

Node ID

and an

End Point ID

•

Node ID:

Example -

Dining Room Lights (8)

- Represents the

value the TRF-ZW10 has assigned to the device.

This value is used when configuring associations, scenes, device
events, and troubleshooting.

•

End Point ID:

Example -

AllLoadDimmer (264)

- Represents the

node’s end point. Nodes can have multiple end points. This value
can be used when troubleshooting.

Содержание Total Control TRF-ZW10













































Результаты поиска

Содержание Total Control TRF-ZW10

Отзывы:

Похожие инструкции для Total Control TRF-ZW10

Бренды по названию

Популярные бренды

URC Total Control TRF-ZW10, Руководство пользователя

Результаты поиска

Содержание Total Control TRF-ZW10

Отзывы:

Похожие инструкции для Total Control TRF-ZW10

Бренды по названию

Популярные бренды