4
Total Control
MRX-8
Owner’s Manual
1
2
Installing the MRX-8
The MRX-8 Advanced Network System Controller can be installed almost anywhere in
the home.
Once physically installed, it requires
programming by a certified URC integrator
in
order to operate local equipment using IP (Network), RS-232 (Serial), IR (Infrared), or
relays. All cables must be connected to their respective ports at the rear of the device.
Network Installation
1. Connect an
Ethernet cable
(
RJ45
) to the rear of the MRX-8 and the onto
an available LAN port of the network’s local router (Luxul preferred).
2. A certified URC integrator is
required
for this step, configure the MRX-8 to
a DHCP/MAC reservation within the local router.
