5
Total Control
HDA-130
Owner’s Manual
Rear Panel Description
Below are the available connections on the rear of the HDA-130:
1. DC IN:
Connect the
supplied 48V DC adapter
to this port to power the
HDA-130 amplifier.
2. LAN:
Full Duplex Gigabit LAN ONLY, for audio streaming and zone control
(Wi-Fi NOT supported, device must be hard-lined to the network).
This port is also used for
PoE+/++
.
3. Analog/Digital Inputs:
Both of the following inputs can be used
simultaneously to provide two (2) HDA “high-definition” audio streams:
•
Analog -
With supplied 3.5 mm adapter.
•
PCM Toslink
(Optical)
4. Sub Out:
Standard RCA connector, signal is left + right full range.
5. Speaker Output:
Terminal block/phoenix style connector that can be
configured one of the following ways:
•
Powered by External 48V DC Adapter (supplied):
Output power of the
amplifier is
2 x 30W RMS per channel @ 8
Ω
.
•
Powered by PoE++ Adapter (not included):
Output power can be set as
one of the following:
■
Power Output
2 x 30W RMS per channel
Slotted-styled
screws are
used to secure the speaker wire
to the terminal block/phoenix
style connector.
1
2
3
4
5
Содержание Total Control HDA-130
Страница 1: ...HDA 130 Owner s Manual Total Control HDA 130 Owner s Manual ...
Страница 4: ...2 Total Control HDA 130 Owner s Manual Parts Pieces Included with the HDA 130 is the following ...
Страница 9: ...7 Total Control HDA 130 Owner s Manual 3 Assure that all screws have been installed securely 3 ...
