8
Total Control
HDA-130
Owner’s Manual
Connecting Speakers
The
HDA-130
can be placed nearly anywhere and deliver power to a local zone.
To connect speaker wire:
1. Connect the
speaker wire
to the positive (red) and negative (black) to the wire
terminals available on the speaker (be mindful of proper polarity).
Please refer to the manufacture’s owner’s manual for specific instructions on
wiring the speaker.
2. Loosen the integrated slotted-style screws (turn counter-clockwise) and
remove
the phoenix connector from the terminal block on the HDA-130
.
3. Secure the
speaker wire into the phoenix connector
(using the integrated
slotted-styled screws), and reinsert it into the terminal block.
4. Using the integrated slotted-styled screws on the left and right sides of the
phoenix connector (image at the right),
secure the phoenix connector to the
terminal block
.
CAUTION!
Verify the polarity
of the
speakers and the wires before
returning the phoenix connector into
the terminal block on the amplifier.
6.5” SP-6EX
HDA-130
Содержание Total Control HDA-130
Страница 1: ...HDA 130 Owner s Manual Total Control HDA 130 Owner s Manual ...
Страница 4: ...2 Total Control HDA 130 Owner s Manual Parts Pieces Included with the HDA 130 is the following ...
Страница 9: ...7 Total Control HDA 130 Owner s Manual 3 Assure that all screws have been installed securely 3 ...
