10
PRODUCT INSTRUCTIONS (CONT.)
PROCESSING FOOD
Please refer to
product overview
list on
page 7 of manual
.
1.
Place the lid
(1)
on the top of the container
(2)
2.
Install the blade
(8 / 9 / 10)
of your choice inside the lid by
aligning the tabs on the blade with the notches of the lid.
Then turn the attachment clockwise until it locks into place.
3.
Install the food chute
(7)
onto the lid.
Then rotate the food chute clockwise until you hear a clear
sound to lock into place.
4.
Insert the food holder
(6)
onto the food you are going
to process. (please refer to best result information at top
of this page).
5.
Attach the food holder (with the food) onto the motor
unit
(5)
.
6.
Connect the plug of the mains cord
(3)
to a mains socket.
7.
Slide the motor unit into the food chute by aligning the
ribs
(12)
and placing the food against the blade attachment.
Large Spiral Blade
(8)
-
Place the food onto the centre
spikes of the blade.
Wide Ribbon Blade
(9)
/ Shredded Blade
(10)
-
Place the food into the cone of the blade.
FOR BEST RESULTS WHILE FOOD CUTTING
For best results, cut the food to be processed into long pieces that
are no longer than the height of the food chute and no more than
7cm in diameter. Also cut flat the top of the food so that the food
holder can be attached to it easier.
Recommended foods are carrots, radishes, cucumbers,
sweet potatoes, pumpkins, and regular potatoes.
Содержание UFS-7
Страница 2: ......
Страница 7: ...7 PRODUCT OVERVIEW 3 4 5 6...
