Urban Fires UF950RCS Installation & Use Instructions V3.10 Nov 2019 Page
7
3.0 Creating a cutout for masonry, a firepit or a firetable top:
The dimensioned drawing below shows the size of opening that MUST BE created to install
the standard UF950RC
S
unit safely into masonry.
Larger, made-to-measure burner trays can be provided by Urban Fires.
Fireboxes supplied by Urban Fires will be made with a suitable burner tray and rebated cutout.
3.1 Burner cut-out dimensions:
The objective is to provide a 10mm rebate to support the burner around its periphery.
The overall height of the space below the burner location must be at least
25
0mm.
The burner space should have an overall height of 270mm (from the top surface) to allow for
gas/240v connections beneath.
