11
Urban Cultivator | 1-877-352-0490 | www.urbancultivator.net
Connecting the Power, Water, and Electricity
Numbered Items
1.
City Water In Connection (Min 30psi required)
Use braided City Hose to connect to your city water
connection. The hose
comes with a standard
⅜” compression fitting.
2.
City Drain Out Connection
Connect the City Drain Hose (1/2” to 3/4“ hose connection) to your city drain
which should be no further than 6’ from the Cultivator and 2’ up from the floor.
3.
Power Connection
Connect the Cultivator to a standard 110/240V power outlet. The electricity plug
should be no further than 2’ away from the unit and should run out on the
same
side as the water and drain hose. The wall receptacle is non-replaceable.
4.
Hole Size For All Connections
Use a 4” hole saw and remove part of the bottom shelf of the cabinet adjacent
to the Cultivator where all the connections run from.
5.
Adjustable Feet
Twist the Cultivators feet to adjust its overall height from 34¼” to 34 ½”
Ensure
product is level.
Leave
1½”
clearance gap for the door swing and handle when installing
the Urban Cultivator Residential adjacent to a wall.
Water In, City Drain Out & Electricity connections run out from one side
only, the left. Please contact Urban Cultivator using
[email protected] or call us toll-free:
+1 877 352 0490 available Monday–Friday. 8:00–16:00 PST.
1
3
2
4
5
2’0” (610mm)
maximum from
floor to City
Drain.
6’0” (1829mm) maximum from
the Cultivator to the City Drain
connection.
Connect the supplied drain hose to the
drain pipe of the kitchen sink either:
- above the P trap
- to the dishwasher connector of the
garbage disposal.
DISCLAIMER: Please make sure that the length of the drain line does not exceed 6ft. In the event that a pump is used, make sure it has capacity exceeding 80GPH. Urban Cultivator will not be
responsible for any losses arising from usage or failure of any additional devices connected to the unit for facilitation of plumbing or drainage.Please refer to applicable local codes for electrical
and plumbing installation.
Max. water pressure: 60psi.
Check home pressure gauge
before installation.
