URAL Motorcycles Wolf 2004 Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 85

background image

65

DISTRIBUTOR’S LIMITED WARRANTY

EMISSION CONTROL SYSTEMS

(49 - State)

Warranty Time Period
Duration

Time or mileage based on engine displacement - whichever occurs first.
Time: five (5) years

Mileage - for motorcycles with engine displacement of 745 cc, 30,000 km (18,642 miles)

Coverage Begins:

•

the date the motorcycle is delivered to the first retail purchaser, or

•

the date the motorcycle is first placed in service as a demonstrator, rental, lease or company motorcycle
prior to retail sale.

Warranty Coverage

This warranty applies to new Ural motorcycles.

This warranty is given in addition to the Distributor’s Limited Warranty and is the only express emission control
system warranty applicable to Ural motorcycles.

Irbit Motorworks of America warrants to the first retail purchaser and each subsequent purchaser that

•

the motorcycle is designed, built and equipped to conform, at the time of sale, with
all US EPA emission standards applicable at the time of manufacture.

•

the motorcycle, when properly maintained and used, will meet applicable emission
regulations within the time and mileage periods.

The obligation of Irbit Motorworks of America

To repair or replace, at its option, any part or parts of the emission control systems which are proven to be
defective in material or factory workmanship under normal use for the applicable period.

Parts & Labor

No charge to you.

Your obligation

To have required maintenance performed in accordance with the Service Coupons contained
in this manual. Failure to have required maintenance performed may result in losing coverage under this
warranty.

The following items are not covered by the emission control system warranty:

1. Failures which arise as a result of misuse, alterations, accident or nonperformance of

maintenance as specified in the Owner’s Manual and the Service Coupons.

2. The replacement of parts (such as spark plugs, fuel and oil filters, etc.) used in

required maintenance.

3. Loss of time, inconvenience, loss of motorcycle use or other consequential

damages.

4. Any motorcycle on which the odometer mileage has been changed so that the

mileage cannot be determined.

RECOMMENDATIONS FOR REQUIRED MAINTENANCE

IT IS RECOMMENDED THAT ANY EMISSION SYSTEM MAINTENANCE BE PERFORMED BY AN AUTHO-

«
...
63
64
65
66
67
...
»

Содержание Wolf 2004






















































































Отзывы:

Нет отзывов

Похожие инструкции для Wolf 2004

Бренд: R&G Страницы: 8

Бренд: N-Com Страницы: 36

Бренд: KTM Страницы: 130

SoundBomb TT-SB.10100.B

Бренд: Denali Страницы: 3

Dirt Runner 90cc

Бренд: Baja motorsports Страницы: 66

Бренд: R&G Страницы: 24

Бренд: Can-Am Страницы: 196

Бренд: Honda Страницы: 26

Бренд: Qingqi Страницы: 48

Бренд: Yadea Страницы: 100

Бренд: axel joost elektronik Страницы: 2

Бренд: Yamaha Страницы: 390

Бренд: Yamaha Страницы: 468

Бренд: Yamaha Страницы: 364

Бренд: Bosch Страницы: 160

Бренд: Twiins Страницы: 40

CYBERCHARGER 50002

Бренд: Ciro Страницы: 3

Бренд: Tractel Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды