URAL Motorcycles 2015 cT, Руководство пользователя, Страница: 34 / 95

FINAL DRIVE OIL REPLACEMENT
Step 1
Place a drain pan under the final drive and
remove the drain plug using a 17mm socket
wrench.
Step 2
Be sure the clean any metal contaminates from
the drain plug and replace the drain plug sealing
washer.
Step 3
Re-install drain plug and washer and torque to
specification.
Step 4
Fill the final drive with 135ml (2wd) or 105ml
(1wd) of recommend gear oil.
Step 6
Check oil level by threading the dipstick into the
case, oil should be full to the upper mark, add
fluid as needed.
NOTE
ALWAYS DISPOSE OF GEAR OIL PROPERLY