URAL Motorcycles 2015 cT, Руководство пользователя, Страница: 11 / 95

PERIODIC MAINTENANCE CHART
Description Odometer reading, km (miles)
New 1000 (625) 5000 (3125) 10000 (6250) 15000 (9375) 20000 (12500) 25000 (15625) 30000 (18750)
Check the painted and chromed surfaces for
dents, scratches and rust
I I I I
Engine oil* I R R R R R R R
Oil filter* R R R R R R R
Final drive and gearbox oil I R I R I R I R
Check valve clearance I I I I I I I
Check tightness of the cylinder stud nuts I I I I I I I
Spark plugs I I R I R I R
Fuel tank filter I I I I
In-line fuel filter R R R
Ignition timing I I I
Air filter* I I R I R I R
Check fuel hoses I I I I I I I
Compliance flanges (check for cracks and other
damage)
I I R I R I R
Throttle body synchronization I I I I I I I
Shock absorbers I I
Inspect wheels and tires (tire pressure , tire wear,
rims breakage and bents, wheel balancing)*
I I I I I I I I
Tightness of spokes I I I I I I I
Tightness of fasteners I I I I I I I I
Disc brake (pads, disc, hoses, calipers and
cylinders, lever travel)
I I I I I I I
Brake fluid level* I I I I I I I/R
Check operations of parking brake I I I I
Front fork oil R
Clutch, throttle and odometer cables, clutch lever
travel
I I I I I I I I
Bearings of the motorcycle and sidecar swing
arms. 2wd linkage on 2wd models, Retro reverse
linkage
I I I
Steering head bearings I I I
Wheel bearings I I I
Sidecar alignment I I I
Battery (charge level, contacts) * I I I I I I I
Electrical equipment I I I I I I I I
Headlight position I I I I I I I I
Lubrication of lever axels, cable ends, rear brakes
cams, splined parts of the drive shafts and hubs,
drive shaft U-joints*
I/L I/L I/L
Test drive P P P P P P P P
I - Inspect, if necessary – adjust, clean or replace R – Replace * - Also repeat after 1 year in use and after long storage
L – Lubricate P – Perform **- Also inspect when replacing tires