UP-308FEW / UP-316FEW
Multi to 1 Setting
Multi-to-1 VLAN is used on CPE side of Ethernet-to-the-Home and is exclusive to VLAN
setting on “VLAN member setting”. When the VLAN member setting is updated, Multi-to-1
setting will be void and vice versa. The "disable port" means the port, which will be excluded
in this setting. All ports excluded in this setting are treated as the same VLAN group. In a
normal Tag Based VLAN network you will not need this configuration option.
There are two limitations for this setting:
1) The original setting of the VLAN group will be cleared and replaced by this special
structure if you enable this function. Conversely, if you set the VLAN Group again, this
special structure will be cleared and replaced by your newest setting.
2) This configuration is for Port-based VLAN only.
User Manual 29