Airplane Flight Manual Supplement
i-linc MFD
UPS Aviation Technologies
February 10, 2003
2345 Turner Rd. SE
Part #:560-1045-02 Rev A
Salem, OR 97302
FAA Approved
Page 6 of 11
Date:
February 26, 2003
4.
NORMAL PROCEDURES
4.1
D
ETAILED
O
PERATING
P
ROCEDURES
The normal operating procedures for the i-linc MFD are described in the Pilot’s Guide listed in the
Section 2.2 on page 5. The pilot shall review and clear all messages after power up.
CAUTION
Caution must be exercised when viewing the map function page in
the North-Up mode to avoid disorientation when transferring to a
function page presented in the Track-UP mode.
4.2
S
YSTEM
S
WITCHES
/ C
ONTROLS
a)
Power/Brightness
The power/brightness control is on the upper right corner of the i-linc MFD. Pulling out this
knob will allow for the brightness to be controlled manually.
b)
Function Key
FN
The function key is located on the lower left corner of the i-linc MFD. The function key
allows the user to scroll through the available functions.
c)
Smart Function Option Keys
The soft keys along the bottom allow for selection of the function as identified directly above
it or perform commonly used actions within a function.
d)
Menu/Enter Key
The Menu /Enter key is located on the bottom right hand corner of the i-linc MFD. Press the
Menu/Enter key to show a menu of options to modify the display of the current function.
Press the Menu/Enter key again to hide the menu. The Menu/Enter key is also used to
confirm entry when user input is required.
e)
Line Select Keys
The line select keys are on the right hand side of the i-linc MFD. These keys are activated by
the Menu/Enter Key. The keys control the various options available to the user.
