Upright TM12, Руководство по обслуживанию и запасным частям

Страница: 14 / 102

Page 2-2
Operation and Specifications
2.1 - Introduction
TM12 Work Platform - European
2.1 I
NTRODUCTION
This manual covers operation of the TM12 Self Propelled Elevating Work Platform. This manual
must be stored on the machine at all times.
2.2 P
RE
-O
PERATION
S
AFETY
I
NSPECTION
Carefully read, understand and follow all safety rules, operating instructions, labels and the Scaf-
fold Industry Association’s MANUAL OF RESPONSIBILITIES. Perform the following steps each
day before use.
1. Open module covers and inspect for damage, oil leaks or missing parts.
2. Check the level of the hydraulic oil with the platform fully lowered. Open the Chassis Door
and remove the reservoir cap, oil should be visible on the dipstick. Add recommended
hydraulic oil if necessary.
3. Check that fluid level in the batteries is correct (See “Battery Maintenance” on Page 2-9).
4. Verify that batteries are charged.
5. Check that AC extension cord has been disconnected from chassis outlet.
6. Check that all guardrails are in place with fasteners properly tightened.
7. Inspect the machine thoroughly for cracked welds, loose hardware, hydraulic leaks, dam-
aged control cable, loose wire connections and wheel bolts.
8. Move machine, if necessary, to unobstructed area to allow for full elevation.
9. Pull Chassis Emergency Stop Switch to the ON position.
10. Pull Platform Emergency Stop Switch to the ON position.
Figure 2-1: Chassis Controls
11. Turn and hold the Chassis Key
Switch to CHASSIS. Push the
Chassis Lift/Lower Switch to
the UP position and fully ele-
vate the platform.
12. Visually inspect the mast
assembly for damage or
erratic operation. Check for
missing or loose parts.
13. Verify that the depression
mechanism supports have
fully rotated into position
under the machine.
14. Turn and hold the Chassis Key
Switch to CHASSIS. Partially
lower the platform by pushing the Chassis Lift/ Lower Switch to the DOWN position, and
check operation of the audible lowering alarm.
Stop Switch
Hour Meter
Key Switch
Chassis Lift/Lower
Switch
Emergency
Chassis
Chassis