Upright SB-80, Руководство по обслуживанию и запасным частям

Страница: 23 / 186

M
ACHINE
P
REPARATION
& O
PERATION
Section
2.7
SB80 Work Platform - European 2-11
Figure 2-6: Securing the machine for transportation
Figure 2-7: Rear chassis tie down lifting lugs
2.7 M
AINTENANCE
Fueling
Fuel
1. Open left turret cover, open fill pipe cap. (see Fig-
ure 2-8)
2. Fill to capacity with gas or diesel motor fuel only.
Use distillate diesel fuel only, do not use residual
or blend.
3. Fuel tank full capacity is 42 US gallons.
Figure 2-8: Fuel Tank
Hydraulic Oil
1. Open left turret cover and check oil level at sight
gauge with the boom stowed and retracted.
Engine running or stopped. (see Figure 2-9)
2. If necessary, fill to capacity with clean ISO com-
patible hydraulic oil. Refer to Routine Service
Table 3-3.
3. Clean area around cap before opening.
4. Open filler / breather cap to add hydraulic oil.
5. Replace cap.
Figure 2-9: Hydraulic Oil Tank
W A R N I N G
!
!
Use a ladder or platform when fueling the
SB80.
DO NOT stand on tires when fueling machine.
Platform Tie
Down Bracket
Wooden Block
4” x 8” x 36”
Support Braces
Chassis Tie Down
Lifting Lugs
Fuel cap
Hydraulic Oil
Level Gauge
Hydraulic Oil Filler/
Breather Cap