UPOWER A03-ATS16A, Руководство пользователя

Страница: 31 / 41

ENG
31
2.4 Connect the Unit
For connecting the ATS, plug “input source A connector” and “input source B
connector” to the two independent power sources or UPSs depending using the
SCHUCKO-IEC or IEC-IEC 16A cables supplied.
Plug the user load to the output 10A (“Output 1 and 2”) or 16A (“Output 3”) sockets
depending on user’s requirements.
3.0 OPERATION
3.1 Power ON/OFF
Put the input power switch in “ON” position (N°1 and 2 Sec 2.1). The output will then
be supplied by the source set as selected.
3.2 Setting Priority of Power Source
It is possible to set the power source preference to supply the output by pushing the
button ((N°1 Sec 2.3) of “source preference selector”. The default power source is
“Source A” .