6.1 Error Codes
H
A
Error Number
Error Code Description
E0
The internal sensor has developed a
fault.
You should contact your thermostat
retailer for assistance.
E1
The remote floor probe has not been
connected, has been wired incorrectly
or the probe is faulty.
E2
The remote air probe has not been
connected, has been wired incorrectly
or the probe is faulty.
6.2 Re-calibrate the Thermostat
If you need to re-calibrate the thermostat, follow these
steps.
1. Press and hold to turn the thermostat OFF.
2. Press and hold BOTH and together until the
temperature appears on the screen.
3. Use to configure the new temperature.
4. Press
A
to confirm setting.
5. Press once to turn the thermostat back ON.
H
A
Calibration Temperature Setting
Set Icon
6 Troubleshooting
1 5
U P O N O R C O M F O RT- E T H E R M O S TAT D I G . P R O G S E T T- 8 6 · I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L
EN
DK
FI
NO
SE
