5
3.Description
1.
USB socket: USB connection data.
2.
Display screen: display function menus, the button will automatically lock the setting after 30
seconds of standby, to prevent operation errors, long press the MENU button for 2 seconds
toactivate the button.
3.
Button:
4.
DMX Input/ Output
：
For DMX 512 connection, use 3-pin XLR signal cable to connect the fixture
and DMX console, and input DMX signal.
5.
Fuse
：
Over current protection.
6.
Power Input
：
Connect to power supply.
7.
Power Output
：
Connect the power supply (110V power supply can connect up to 3 pieces of
beam, 220V power supply can connect up to 6 pieces of beam
4.Lamp bulb
There is high voltage inside the bulb,which may break during operation.The ultraviolet light emitted
by the bulb is harmful to the eyes and skin.Do not stare directly at the fixture during operation.
1.In order to protect the fixture, please turn off the fixture first when turning off the lamp, and then
disconnect the power after running for at least 5 minutes.
2.Do not touch the bulb with bare hands. Once touched by hand, wipe with alcohol and then dry with
soft linen.
3.When the lamp is on, the bulb operates under high pressure, so there is a risk of rupture. The
degree of danger is related to the length of use time, temperature and unreasonable operation and
other factors. Therefore, please do not use bulbs that exceed the service life.
4.Make sure the bulb is installed in the center to ensure the best results.
MENU
Return
DOWN
To the next option
UP
Go to previous option
ENTER
Enter menu selection function\Confirm selected
function
