© UPLIFT Desk
• 800-349-3839 • [email protected] • upliftdesk.com
6
Step 8
With you and your friend on opposite ends of the ta-
ble assembly, grab the desktop with one hand and the
Leg assembly with the other hand, as shown.
Support both the frame and the desktop equally, and
gently rotate the table 90 degrees onto its side.
Readjust your grip and rotate another 90 degrees,
so that your table is right-side up. Adjust the leveling
studs or casters as needed to make the table level on
your floor.
Step 9
Position your table where you’d like it to be.
If you installed casters:
Moving is easy! Make sure the
casters are unlocked and roll it to the desired location.
If you did not install casters:
Using two people, lift
your desk (do not drag it) by holding onto the part of
the Leg assembly that is secured to the desktop.
Note:
Never lift by holding on to the Desktop itself, as
this will put undue stress on the screws.
