© UPLIFT Desk
• 1-800-349-3839 • [email protected] • www.upliftdesk.com
6
If your desktop does not have metal threaded inserts,
use the #10x5/8’’ Wood screws (part 17a)
If your desktop
does
have metal threaded inserts,
use the #10-24x5/8’’ Machine screws (part 17b)
For now, do NOT put a screw into the hole
on the Corner crossbar end.
*
*
L.
Slide the two (2) remaining Crossbar rails
(part 6) into the Crossbar end on the left leg, cre-
ating the 1-leg assembly. Place the 1-leg assembly
onto the Return desktop (part 21), making sure the
Crossbar rails are inserted into the Corner crossbar
end on the 2-leg assembly.
Line up the holes on the the 1-leg assembly with
the pre-drilled holes on the Return desktop. Use
four (4) of the screws that you used in Step J,
above.
K.
Using eight (8) M6x10 screws (part 16),
secure the Crossbar rail (part 6) and Open
End Rail (part 7) to the Frame assembly.
20
16
11
12
17
17
17
17
a
a
a
b
M.
Place the Control box (part 11) inside
the Corner crossbar end part of the 2-leg
assembly at the pre-drilled location, and
attach using two (2) #10x5/8’’ Wood
screws (part 17a).
Place the Keypad (part 12) on the Return
desktop assembly and attach using two (2)
of the #10x5/8’’ Wood screws (part 17a).
Most UPLIFT Desktops include pre-drilled
hole locations for the keypad on each end.
Double-check that the desk frame is properly positioned
on the underside of the desktop.
Attach the desk frame assembly to the underside of the
desktop using eight (8) of the screws that you have chosen.
J.
Choose the screw to fasten your frame to your desktop.
