background image

Operating

 

 

 

 

   

 

   

 

 

WARNING: 

Never use this appliance for other than the intended use. DO NOT use this appliance to prepare

food.

   

 

WARNING: 

Initial Lighting: 

When lit for the first time, the appliance emits a slight odor. This is a normal temporary condition caused  

by the “burn-in ” of internal paints and lubricants used i  n the manufacturing process and does not occur again. Simply run 

the main burner on high for approximately one-half hour.

Children and adults should be alerted to the hazards of high surface temperatures and should stay away from the 

appliance to avoid burns or clothing ignition. The appliance comes with a heat shield which is an important safety

component preventing contact with the fire bowl when adjusting the propane valve.

Children should be carefully supervised when they are in the area of the appliance.

Clothing or other flammable materials should not be hung from the appliance, or placed on or near the appliance. The 

area above the fire pit may be extremely hot. Direct contact with these surfaces should be avoided in order to prevent

 

burns or clothing ignition.

Any guard or protective device removed for servicing the appliance must be replaced prior to operating the appliance.

Installation and repair should be done by a qualified service person.

The appliance should be inspected before each use and at least annually by a qualified service person. More frequent

cleaning may be required necessary. It is imperative that the control compartment, burners and circulating air 

passageways of the appliance be kept clean.

   

 

WARNING: 

Never use the appliance while it is raining. Always turn the appliance off when raining.

Never use the appliance if the burner is damaged. Inspect the burner before each use. Ensure that no debris such as

leaves; grass or other objects have entered or are on the appliance. If the burner is damaged it must be replaced prior

to using this appliance with a replacement burner specified by your dealer.

Inspect the hose assembly before each use. If there is evidence of excessive abrasion or wear, or if the hose is 

damaged it must be replaced prior to using the appliance with a replacement hose assembly specified by your dealer.

 

 

 

 

   

 

   

 

 

WARNING: Any modification to the appliance may compromise the safety of this appliance. 

Special concern is as follows:

Do not bypass the thermocouple safety.

Do not operate the appliance if any parts have been under water. Immediately call a qualified service technician to 

inspect the appliance and replace any part of the control system, and any gas control, which has been under water.

1

1

Содержание GFT-31823
















Отзывы: