7.
Advanced System Operation
28
CommPact User Manual
To delete a message:
1.
From the Service menu, select Messages, Delete Message [7023];
OK?
is
displayed.
2.
Press
; the message is deleted.
The Record and Play options can also be accessed via a convenient shortcut
without needing to enter a valid user code.
To access the Record Message option from Standby mode, press
then
.
To access the Play Message option from Standby mode, press
then
.
Sounder Tests
To test the external wireless sounder:
•
From the Service menu, select WL Sounder Test [703]; the wireless
sounder is sounded briefly.
To test the built-in sounder:
•
From the Service menu, select Sounder Test [704]; the built-in sounder
is sounded briefly.
Interface Test
The Interface test enables you to check if the speaker, LEDs and LCD are functioning
correctly.
To test the system interface:
•
From the Service menu, select Interface Test [705]; a short sequence of
chimes are sounded from the speaker, all LEDs flash and the LCD is
tested on all connected LCD keypads.
Walk Test
Walk Test mode enables you to test all the detectors registered to your system without
triggering an alarm.
To initiate Walk Test mode:
1.
From the Service menu, select Walk Test [706]; a list of registered detector
appears.
2.
Trigger each detector; when the system receives a successful transmission
from a detector, the detector is removed from the list.
3.
When all the detectors are removed from the list, End Walk Test is
displayed.
4.
Press
to exit Walk Test mode.
