UPair 2 Ultrasonic 3D+4K, Руководство пользователя

Страница: 10 / 28

1. The battery charger must be connected to an AC power supply (100 to 240V, 50/60Hz)
first. If necessary, please use the power adapter.
2. When the battery is turned off, connect the battery to the UPAIR charger.
3. The battery level indicators will show the status level as the battery is charging.
4. When fully charged, the battery level indicators will go off, remove the battery from the
charger after that.
5. The battery will become hot after a flight, do not charge it immediately, wait until it cools
down before charging it.
6. The optimal charging temperature range of the battery is from 0 ℃
to 40℃.
If it is beyond this
temperature range, please do not charge the battery.
7. The intelligent aircraft's battery and the remote control's battery can be charged simultaneously,
but their charging times are different.
Tips:
* Before you attach or detach the battery from the aircraft, please make sure the battery is
turned off. Please do not attach and detach the battery when the battery is turned on.
* Charge the Intelligent aircraft's battery only with the original UPAIR charger, other chargers may
cause damage to the UPAIR Drone, such damage will not be covered by the UPAIR after-sale
service.
Remote Controller
This section describes the remote controller and how to operate it.
Remote Controller Profile
The 4K/3D controller uses Digital Command Transmission and Image Transmission. The digital
transmission part works in the 2.4Ghz frequency band and realizes full-band random frequency
hopping communication with strong anti-interference. The integrated camera function, Gimbal operation
function button, the controller and aircraft built-in 2.4G controller receiver have been successfully
matched. The image graphics transmission part works in the 5.8Ghz frequency band to receive
image signals from the aircraft and outputs to the terminal display device.
9