Unwin Combined Webbing Tie-down with 2 & 3 point Occupant Restraint Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 24

Unwin Combined Webbing Tie-down with 2 & 3 point Occupant Restraint Скачать руководство пользователя страница 8

Before installing and using the combined wheelchair & occupant restraint

• Ensure that the wheelchair is correctly maintained and that the settings of any adjustable parts are made

according to ‘Instructions for Use in Transport’.

• Whenever possible remove any items of luggage etc that may be attached to the wheelchair and secure

or store separately during transport in order to reduce the potential for injury to other passengers
travelling in the vehicle.

• Extra care must be exercised when using vehicle boarding aids such as passenger lifts or ramps during

the loading process. Refer to ‘Instructions For Use’ for information on safe slopes.

• Position the wheelchair facing forward - centrally in the designated region of the vehicle.

Ensure the

wheelchair brakes are applied.

• To minimise the potential for head injuries in an impact, allow a clear space of at least 400 mm behind

and 650 mm, (FCZ, front clear zone), in front of the head of the wheelchair user, (Fig A). The shoulder
belt anchorage must be roof or side-wall anchored at a height level such that the belt webbing passes
over the midpoint of the occupant shoulder and at a height that is at or just above the level of the
occupants shoulders so as not to impose downward loads on the spine.

• A height provision (HHT) ranging from 1000mm to 1550mm should be made, depending on the size

of the passenger. There should also be 200 mm of clear space either side of the wheelchair centre line.
If these clear space dimensions cannot be provided then any should be adequately padded and comply
with impact performance requirements of ECE Regulation 21 ‘FMVSS 201’. All vehicle padding should
comply with the flammability require ments of ECE Regulation 118 ‘FMVSS 302’.

Note: seated head
height (HHT)
ranges from as low
as 1000mm for a
6-year-old child to
1550mm for a tall
adult.

8

Combined webbing tie-downs with 2 & 3 point occupant restraints

Wheelchair & occupant restraint

«
...
6
7
8
9
10
...
»

Содержание Combined Webbing Tie-down with 2 & 3 point Occupant Restraint

























Отзывы:

Нет отзывов