manualshive.com logo in svg

Unverferth Rolling Harrow II, Руководство оператора / Каталог запасных частей

Поделиться
Скачать
Unverferth Rolling Harrow II Скачать руководство пользователя страница 44

-44-

OPTIONAL IMPLEMENT TRAIL-HITCH (BUNDLE #83116)

FIG. 3-22

OM-01356

CAUTION! THIS ADD-ON HITCH IS DE-

SIGNED FOR TOWING SECONDARY SOIL

CONDITIONERS SUCH AS THE ROLLING HARROW.

TOWING PRIMARY DEEP TILLAGE TOOLS SUCH

AS CULTIVATORS, MAY CAUSE STRUCTURAL

DAMAGE TO YOUR EQUIPMENT.

NOTE: Refer to pages 10 and 11 for proper

height adjustment of hitch.

1.

Loosely assemble rear support arms

(83043) to the rear tube (83115) using

two 5/8-11 x 3 3/4 center-to-center of the

U-bolts (93647) and four locknuts (9801)

per arm. Be sure that the plate is cen-

tered between the arms.

2.

Position the assembly onto your cultiva-

tor frame so that each support arm is

near a joint. Center plate on cultivator

and secure to the frame using the 5/8-11

x 4 11/16 center-to-center of the U-bolts

and locknuts (9801).

NOTE: On some cultivators the U-channels

must be installed. Position around the cultiva-

tors frame tube and position U-bolts around

them. Refer to the illustration as shown for

assembly for your size of frame tube.

3.

Install front support (83029) to cultivator

rame by aligning with plate on rear tube

and fasten using 5/8-11 x 4 11/16" lg.

center-to-center of the U-bolts (93647) and

locknuts (9801). The U-Channels may also

have to be installed as for the support

arms for adequate tube support.

4.

Assemble hitch tube (83063) to supports

using two 5/8-11 x 4 11/16" lg. center-to-

center of the U-bolts (93647) on the rear

and a 3/4-10 x 8" lg. capscrew (9390-

161) and elastic stop nut (9398-021) on

the front support.

NOTE: Allow a enough clearance from pin

hole to the back of the machine for adequate

turning of secondary tool. For further adjust-

ments, refer to operations for tongue exten-

sion on Rolling Harrow II (page 10).

5.

Tighten all hardware.

OM-01357

FIG. 3-23

ASSEMBLY

SEE FIGURE 3-23

FOR PROPER SPACERS

Содержание Rolling Harrow II



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды