Unverferth Rolling Harrow II, Руководство оператора / Каталог запасных частей

Страница: 24 / 66

OM-00820
FIG. 3-6
WING FOLD LINKAGE
23. Attach folding linkage bars (81506 or
84736) to wing frame (Fig. 3-9).
A. Position 1 1/4" lg. spacer tube (81561)
between linkage bars and install into
wing frame.
B. Align holes and install 1 1/4" x 3 5/16"
lg. pin (83263). Retain into position with
a retaining ring (94144).
ASSEMBLE THE WING FOLDING LINKAGE
TO THE UNIT AS FOLLOWS:
21. Determine the wing folding linkage re-
quired for your machine (Fig. 3-7 & Fig
3-8).
22. Attach cylinder arm to base frame. Re-
tain into position with a 1 1/4" x 2 3/8"
lg. pin (83262) and retaining ring (94144)
(Fig. 3-9).
ASSEMBLY
19. Place cylinders to machine with the
"ports" positioned inward, toward the
centerline of the machine. This requires
the following change to both wing trans-
port wheel cylinders (Fig. 3-6).
A. Disassemble tie-rods from cylinder.
B. Rotate rod end port 90
o
.
C. Reassemble and retighten tie-rods.
20. Install transport wheel cylinder onto wings
(Fig. 3-4). Retain into position with two
1" dia. x 3 3/4" lg. pins (85632) and four
spiral pins (91144-165), on each side.
OM-00822
FIG. 3-7
12' Base with 3-6' Wings
12' Base with 7 or 8' Wings 15' Base with 7-11' Wings
15' Base with 3-6' Wings
FIG. 3-8
MANUAL 84914/111997-2