UNV DC4304, Быстрое руководство

Страница: 19 / 33

10
Installing the Device in a Rack
NOTE!

You can install your device in a standard 19-inch rack. The rack
should meet the requirement on bearing the weight of the device
and its accessories. The following section uses a standard 19-inch
rack as an example.

Before the installation, make sure the rack is stable and correctly
grounded, and make sure there are no obstacles that might hamper
the installation inside or near the rack.
You can front-mount or rear-mount your device in a standard 19-inch
rack with mounting brackets.
Installing the device to a rack does not require sliding rails or a tray. The
mounting brackets can bear the weight of the device.
The following describes how to front-mount the device. The
rear-mounting method is similar, and thus not provided in this manual.
Preparing for the Installation

Examine the grounding and stability of the rack, determine the
device installation position in the rack, and make sure there are no
obstacles that might hamper the installation inside or near the
rack.

Move your device to a place near the rack.
Installing the Mounting Brackets
Checking before the installation
Mounting brackets are placed in the accessory package with screws.
Each device is shipped with two identical mounting brackets.