UNV DC4304, Быстрое руководство

Страница: 14 / 33

5
Port Quantity Description
Ethernet
copper port
2
Used to connect to Ethernet to
communicate with the devices on the
network, to receive IP camera streams,
and to be configured by the client through
Web interface.
10M/100M/1000M/auto-sensing,
half
duplex/full duplex/auto-sensing, RJ-45
connector.
2
Installing the Device
Preparation
Checking the Device Package
Before you install the device, verify the device model and check the
components and their quantity against the packing list to make sure all
items listed are included in the package.
WARNING!
Do not remove the dismantlement-preventive seal from the device
chassis cover without permission. To open the chassis, contact your
dealer. Otherwise, we shall not be held liable for any consequence
caused thereby.
Checking the Installation Environment
The device can be installed indoors only, and must meet the following
requirements:

Use correct lightning protection devices for the device power
source, audio/video signals, and RS-485 ports.