Unox XFT LineMiss, Инструкция по эксплуатации

Страница: 29 / 36

Oven-user interface
%JHJUBMNPEFMTTIPXBOZBMBSNXBSOJOHNFTTBHFTSF
-
garding the oven or prover on the display.
5IFXBSOJOHNFTTBHFT U - WARNING TJHOBMNBM -
functions that nevertheless allow the appliance
and peripherals to operate, though with a restrict-
ed set of functions.
Pressing the button erases the list of WARN-
ING MESSAGES from the screen, using the
button to switch between OVEN and PROVER calls
the list back to the screen.
- The alarm messages
" "-"3. JEFOUJGZ TJUVB
-
UJPOTUIBUGBJMUPBMMPXBOZBQQMJBODFQFSJQIFSBMPQ -
eration whatsoever, and therefore must be put into
STOP mode. If the alarm messages strictly refer to
UIFQFSJQIFSBMT QSPWFSPSIPPETUIFPWFODBOTUJMM
be used.
When there are several
"-"3.8"3/*/(.&44"(&4
, the user can scroll through these by repeatedly press-
JOH45"354501
Display Description Effect Troubleshooting
OVEN
" The motors have overheat-
ed Oven shutdown Contact the Customer Assis-
tance Service
" The safety thermostat has
overheated Oven shutdown Contact the Customer Assis-
tance Service
" An error has been detected
in the data recorded by the
cavity probe Oven shutdown Contact the Customer Assis-
tance Service
"
Communication between
the control P.C.B. and the
power P.C.B. has been cut
off Oven shutdown Contact the Customer Assis-
tance Service
6
The temperature of the
oven power P.C.B. is too
high There is a risk of permanent
damage to the power P.C.B. Make sure the positioning
standards specified in the in-
stallation manual have been
observed. Contact the Custom-
er Assistance Service
PROVER
" An error has been detected
in the data recorded by the
prover cavity probe Prover shutdown Contact the Customer Assis-
tance Service
English
29
LineMiss
™