UNO
R
4.
DIFFERENT FUNCTIONS ( SET UP ONLY IN
OVENS WITH Classic, Dynamic and 800
Manual CONTROL BOARD )
OVEN DOOR MANAGEMENT
On each appliance there is a switch that stops the
functioning of the oven when you open the door.
When you open the door, the cooking cycle (both
in the manual and in the programmed mode) goes
into a pause (no parameter is lost). When you close
the door, the cooking cycle starts again from where
it stopped.
The Matic ovens are equipped with a door
electromagnetic locking system that allows an
assisted opening through a button placed on the
control panel when electrically connected to the
network.
This system automatically opens the door at the end
of baking programs.
The Matic ovens are also equipped with a special
safety string to be pulled in case a manual opening
of the door is required.
FUNCTIONING CYCLE OF FANS
Every 2 minutes the fans stop and reverse their
direction of rotation.
5.
CLEANING
WARNING
:
Before starting any maintenance or cleaning
operation it is necessary to disconnect the electrical
power supply and wait for the appliance to cool
down.
5.1 FIRST USE OF THE OVEN
Before the first use of the appliance: clean the
metal part with hot water and soap and rinse it.
Never wash the inner part of the oven with acids or
aggressive detergents.
With the empty cavity, heat the oven up for about 30
minutes at a temperature of 200°C to eliminate any
thermic insulation smell.
5.2 CAVITY CLEANING
At the end of each cooking cycle, clean the cavity
using only proper products.
Never clean the stainless steel with acids, aggressive
detergents or other product containing chlorine
(sodic hypochlorite, hydrochloric acid, etc.), even
though they are diluted.
5.3
CLEANING OF THE EXTERNAL PART OF THE
OVEN
Never use a jet of water in pressure to clean the
external part of the oven. Only use wet clothes.
6.
TURNING OFF IN CASE OF BREAKDOWN
If there is a breakdown, deactivate the appliance:
-
disconnect the electrical power supply
automatic circuit breaker placed upstream
from the appliance.
-
consult a technical service center authorized
by the manufacturer where you can find
trained personnel.
ENGLISH
ENGLISH
11
