Unox Bakerlux Speed.Pro XESW-03HS-EDDN, Установка - Использование - Обслуживание

Страница: 7 / 46

7
Warnings for the electrical connections
■
Before installing the appliance, check that the systems
are compliant with the installation standards in the
specific country and with the specifications indicated
on the appliance serial plate.
■
The electrical system is designed according to the IEC
EN 60335 standard - for the electrical safety of house-
hold and commercial appliances.
■
Connections to the power mains must comply with the
regulations in force in the country where the appliance
is installed; and all connections must be made by qual-
ified technicians authorised by the manufacturer.Failure
to comply with these regulations may cause damage
and injuries, invalidates the warranty and relieves the
manufacturer of all liability.
■
The appliance must be connected directly to the pow-
er supply and must be fitted with an easily accessible
switch, installed in the system in accordance with the
regulations in force in the country in which the appli-
ance is being installed. This switch must separate all
pole contacts so as to guarantee complete disconnec-
tion in overvoltage category III conditions.
■
There must be an earth connection made using a
single, seamless cable, without interruptions (in-
cluding the circuit breaker). The yellow/green
earth wire must be at least 3 mm longer than the other
wires.
■
Each appliance must be included in an equipo-
tential bonding system that complies with the
regulations in force in the country where the
appliance is installed.